Be taught concerning the superior enhancements and capabilities of the Palette 2 and begin 3D printing with as much as 4 colours on a single-extruder 3D printer.
Posted on February 19, 2019
by
Chris Morgan
The Palette 2 from Mosaic Manufacturing is the second iteration of their wildly widespread filament splicing machine for single extruder 3D printers. We check out the adjustments made and the way they profit the person, in addition to go to enhancements to the just about full redesign of the chassis, making it rather more user-friendly and accessible for the top person.
Mosaic Manufacturing virtually stands alone within the trade as the key title in enabling the at-home 3D printer person with the flexibility to show a single-extruder 3D printer right into a four-color powerhouse. Their preliminary Palette mannequin was an introduction into what is feasible with this nonetheless, considerably new know-how, whereas the Palette 2 refines most of the options and improves most of them. Headquartered in Canada, Mosaic Mfg. is creating choices in additive manufacturing not just for the house person however for industries as nicely. With their SEEM know-how, they hope to allow each person from the hobbyist, all the way in which to the manufacturing facility flooring.
Only a small pattern of the superior designs you may make multi-color with the Palette 2.
Product Options
- Plug and Play Setup
- 4 Colours Spliced Into One Functionality
- A number of Materials Sort Help
- Simple to Clear Jams and Restore
The brand new Palette 2 is far simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is simpler to work with, and there’s no longer a necessity to put in a separate sensor to measure filament circulation onto the 3D printer; the circulation sensor is now constructed immediately into the Palette 2. Synching with the 3D printer and pc is now a lot simpler as nicely, making the whole arrange course of a lot faster.
Plug and Play Setup
The brand new Palette 2 is far simpler to configure and arrange for the hobbyist 3D printer than the earlier Palette. The interface is simpler to work with, and there’s no longer a necessity to put in a separate sensor to measure filament circulation onto the 3D printer; the circulation sensor is now constructed immediately into the Palette 2. Synching with the 3D printer and pc is now a lot simpler as nicely, making the whole arrange course of a lot faster.
The CANVAS Interface is easy and simple to make use of.
4 Colours Spliced Into One Functionality
The mainstay enchantment of the Palette 2 is the flexibility to show any single-extruder 3D printer right into a four-color machine able to printing multi-color prints. The brand new Palette 2 has been upgraded with a number of options and features to make the method simple to make use of and execute. First is the CANVAS platform. Beforehand, there was extra hands-on implementation required from the person to get sustainable outcomes, by slicing twice and loading two totally different information into each the 3D printer and the Palette. Now with CANVAS, you’ll be able to add your favourite slicer profiles and work virtually utterly in a single interface, with no duplicate slicing essential.
A number of Materials Sort Help
Along with 3D printing with as much as 4 colours, the Palette 2 will also be set as much as 3D print with totally different supplies in a single print. PLA and PETG are the preferred combos, however with 4 retailers, the chances are actually a lot bigger than with a single-extrusion machine alone. The Palette 2 is able to splicing ABS, TPU, Nylon, and PLA-scaffold as nicely.
Filament Run Out Detection
The sensors on the Palette 2 may also handle filament run out and be programmed with choices. For 3D prints with lower than 4 colours, a further spool of the identical colour and materials might be designated because the ‘back-up’ spool when the principle spool runs out, due to this fact avoiding a stalled 3D print. You can too load as much as 4 of the identical colour and filament and do big tasks that require as much as 4 kg of filament – you received’t must run out of filament ever once more!
The Run Out Sensor helps maintain your uptime to a most.
Simple to Clear Jams and Restore
One of many extra helpful redesigns within the Palette 2 is the flexibility to simply and shortly clear jams, impact repairs, and substitute broken components with the brand new modular panels. Not solely are the panels clear, so you’ll be able to see precisely the place the problem is, however there are a number of panels in strategic areas that may be simply eliminated with thumb screws for fast entry and upkeep. This function alone is a significant promoting level for this superior unit.
There are a selection of optimistic and helpful makes use of for the 3D printer at dwelling to contemplate shopping for the Palette 2 so as to add to their toolkit. At the start is the flexibility to 3D print with as much as 4 colours. Simply upgrading to a brand new dual-extrusion 3D printer will run upwards of $1500+ for fundamental, non-supported 3D printers. Going full-bore for a quad-color machine will run considerably extra. The Palette 2 provides a really inexpensive software for any person seeking to do extra with their 3D printer.
The clear entry panels provide you with unprecedented readability when coping with troubleshooting points.
Additionally, if there are important portions of filament getting used on a single 3D print, the Palette 2 can be utilized as an never-ending filament spool – successfully giving the person a 4 kg spool to work with (so long as they’re all loaded in fact.)
Better of all are the various improved person experiences. From the interface to the setup and repairability, the Palette 2 is improved in virtually each manner over the unique Palette. Mosaic Mfg. has completed an important job listening to the neighborhood and making adjustments that profit the person.
The Palette 2 comes within the base mannequin, in addition to the Palette 2+. The Palette 2+ is more proficient at filament manufacturing pace than the Palette 2, giving extra superior customers (these utilizing the Palette 2+ for industrial functions) extra choices for varied different filaments like ABS, TPU, Nylon, and PVA).
The Palette 2 will also be synced together with your printer and pc on the similar time with a further add-on, the CANVAS Hub (offered individually). This enables communication between the 3D printer and the Palette 2; you can even join the Palette 2, 3D printer AND CANVAS to your pc, making the whole workflow integration seamless from machine to machine.
From our personal checks, the outcomes had been incredible. With just one small calibration situation (which we ignored initially) that prompted a bit extra stringing than standard, we now have had wonderful outcomes with the Palette 2 and a number of other 3D printers we now have examined with. As with most issues that contain 3D printing, the arrange takes a bit tweaking to get issues good and some run-throughs to ensure the tweaks are working. However as soon as we had it dialed in, it labored nice.
The Palette 2 is a superb possibility for any 3D printer person who’s seeking to develop their multi-color capabilities with out having to buy a completely new 3D printer. With it’s rather more inexpensive price, and the brand new and drastically improved adjustments made, any person can benefit from the Palette 2 to create some actually superb 3D prints.
Conclusion
The Palette 2 is a incredible add-on for anybody seeking to develop into a number of colours or a number of filament 3D printing. The help and enhancements from Mosaic Mfg. are top-notch, they usually have taken enter from the 3D printing neighborhood to coronary heart and vastly improved the usability and capabilities and molded them into the Palette 2.
