Funding from the US Division of Power’s Fermi Nationwide Accelerator Laboratory has enabled researchers at Northwestern College and Fermilab to invent a brand new course of for 3D printing high-temperature superconductors. This methodology is the primary to manufacture 3D printed ceramic superconductors with a monocrystalline microstructure and is at the moment awaiting US patent approval. Their paper was printed in Nature Communications.
Superconductors are a particular kind of fabric that may conduct electrical energy with zero resistance, however solely at extraordinarily chilly temperatures. Excessive-temperature superconductors are distinctive as a result of they work at temperatures better than conventional superconductors, making them extra sensible for functions.
Cristian Boffo, a co-author on the paper, secured funding for the mission by means of Fermilab’s Laboratory Directed Analysis and Improvement program. Boffo is the mission director for the Proton Enchancment Plan-II, a mission constructing a state-of-the-art superconducting linear accelerator at Fermilab.
Boffo obtained LDRD funding to develop superior magnets known as superconducting undulators, aligning with actions deliberate in Fermilab’s Utilized Physics and Superconducting Know-how Directorate. One of many mission’s goals is to discover new applied sciences that may revolutionize the design and manufacturing of superconducting undulators by means of the introduction of high-temperature superconductors and 3D printing.
“Fermilab desires to make higher and higher magnet programs which can be extra environment friendly and attain larger efficiency,” stated Boffo. “Northwestern gives the expertise in 3D printing, and we offer expertise in superconductors.”
Excessive-temperature superconductors
When electrical energy flows by means of a cloth at regular temperatures, there’ll at all times be some power loss attributable to resistance. Over 100 years in the past, scientists found the phenomenon of superconductivity: when introduced right down to temperatures near absolute zero – minus 460 levels Fahrenheit (minus 273 levels Celsius) – supplies lose electrical resistance, enabling electrical energy to maneuver by means of them extraordinarily effectively. This requires costly and hard-to-handle coolants like liquid helium.
Within the Eighties, scientists found high-temperature superconductors that might function at the next – albeit nonetheless frigid – essential temperature of minus 321 levels Fahrenheit (minus 196 levels Celsius). These are principally ceramic supplies, typically copper oxides mixed with different metallic oxides. These superconductors may be cooled with liquid nitrogen as an alternative of liquid helium.
“Utilizing liquid nitrogen, it’s a lot inexpensive to chill down the construction to the place it turns into superconducting,” stated David Dunand, a professor of supplies science and engineering at Northwestern College who carried out the analysis.
At the moment, technological makes use of for superconductivity vary from low-loss energy mills to electrical motors, from medical imaging expertise to fast, quiet magnetically levitated trains. However superconductors’ want for excessive chilly limits their usefulness, so creating high-temperature superconductors is important for advancing on a regular basis functions. And in physics, high-temperature superconductors are particularly advantageous as a result of they preserve their superconductivity in larger magnetic fields than conventional superconducting supplies do.
Polycrystals to monocrystal
To 3D print superconducting ceramics, scientists begin with a ‘precursor powder’: a finely milled mixture of chemical compounds. They mix the powder with a binder to create a printable paste, which may then be extruded by a 3D printer to construct a construction, layer by layer – just like the coil approach of constructing pottery. The construction is then heated and baked in a furnace, a high-temperature course of often known as sintering.
The ensuing piece has a polycrystalline microstructure, however this isn’t very best for creating or trapping a robust magnetic subject. A monocrystalline superconductor would have significantly better properties for potential makes use of in accelerator physics, however it can’t be made by way of powder 3D printing.
So Dunand and his graduate scholar Dingchang Zhang sought to reveal, for the primary time, a solution to mix the superior physics properties of a monocrystalline superconductor with the advanced structure of a 3D printed polycrystalline construction.
The brand new paper outlines their profitable methodology. They 3D print a ceramic polycrystalline superconductor utilizing frequent precursor powder combination known as yttrium barium copper oxide, or YBCO. As soon as it’s sintered, researchers place a single-crystal seed made from a unique superconducting materials, neodymium barium copper oxide, or NdBCO, on prime. They then start a course of known as prime seeded soften development: heating the printed construction so it partially melts, filling holes or pores within the 3D printed microstructure, making it extra sturdy. Researchers then cool the construction very slowly so it re-solidifies with the identical crystallographic orientation because the seed. The ultimate piece retains its authentic 3D printed form, now with a stronger monocrystalline construction.
Dunand and Zhang used their methodology first with a 3D printed micro-lattice form, then graduated to extra advanced shapes. They discovered they may use a single seed to manufacture superconducting items as much as 10 centimeters in diameter. They even used their methodology to 3D print a foil of superconducting materials that Zhang folded into the form of a tiny paper airplane, demonstrating that 3D printed superconductors may be fashioned into advanced shapes with sharp corners.
Sooner or later, they hope to analyze multi-seed strategies – completely different from the polycrystal methodology – during which they hope to supply bigger items by utilizing many separate single-crystal seeds.
“If we need to use it for accelerators, we have to print bigger components,” stated Zhang, who accomplished his PhD at Northwestern in August 2024. “If we need to get larger components, how will we place the seeds? Whether or not that may produce other issues, we don’t know.”
Dunand stated their methodology “made an enormous step ahead” by displaying it’s doable to create monocrystal superconductors with advanced shapes. They hope it additionally conjures up additional analysis into 3D printing monocrystal ceramics.
“I feel it’s extremely, extremely scalable,” stated Dunand. If they may do it of their lab at Northwestern, Dunand stated he thinks it may be replicated in lots of different settings.
“This new expertise will allow new magnet designs, resulting in larger performances and probably even permit the manufacturing of a brand new technology of superconducting radio-frequency cavities,” stated Boffo. “I feel that this was a really profitable collaboration.”
Fermi Nationwide Accelerator Laboratory is America’s premier nationwide laboratory for particle physics and accelerator analysis. Fermi Ahead Discovery Group manages Fermilab for the US Division of Power Workplace of Science.
