Free STL file Underdog 👽 ・3D printing template to obtain・Cults

Underdog, is an American Saturday morning animated tv collection that ran from 1964, to 1967. It is likely one of the early Saturday morning cartoons.

Underdog, Shoeshine Boy’s heroic alter ego, seems at any time when love curiosity Candy Polly Purebred is being victimized by such villains as Simon Bar Sinister or Riff Raff. Underdog almost at all times speaks in rhyming couplets equivalent to in “There is no have to concern, Underdog is right here!” His voice was provided by Wally Cox.

One half, u_head, requires helps. The half is provided with built-in helps for printing at .2mm layer peak, in addition to with out helps if you wish to use slicer helps. If in case you have the correct filament colours, no portray is required.

This mannequin will be printed and displayed stand-alone or paired with my subsequent mannequin, Riff-Raff, that may go beneath the manhole cowl.

The assembled Underdog mannequin is 170mm tall.

Get pleasure from!

……………………………………………………………………………………………..

Particular shoutout to maker Benoît Lussier for offering QA printing and high quality suggestions.
Particular because of Jason McMillan (makerworld ID Gatekeeper) for creating the Bambu Print Profile.

……………………………………………………………………………………………..

Print Directions:
Helps: u_head half solely. Provided with built-in helps
Decision: .2mm
Infill: 15%

Constructing the mannequin

Colours

Black: (Satan Designs PLA – Black)
u_eyeblacks (file comprises two equivalent items)
u_eyebrows
u_nose
u_hair
u_ear_left
u_ear_right
..

Blue: (Satan Designs PLA – Blue)
u_cape
u_cape_strap_left
u_cape_strap_right
..

Aluminum: (Satan Designs PLA – Aluminum)
manhole_cover
..

Pores and skin: (Paramount3d – Common Beige)
u_head
u_head_with_supports
u_hand_right
u_hand_left
..

Purple: (Hatchbox PLA – True Purple)
u_body
u_arm_right
u_arm_left
U_feet_right
u_feet_left
..

White: (Satan Designs PLA – White)
eyewhite_left
eyewhite_right
u_U
..

……………………………………………………………………………………………..

Printing and meeting ideas

Printing ideas:

1 – One half requires assist, u_head. The half is provided with built-in helps which have been examined for printing at .2mm layer peak. One other half can be provided with out the built-in helps and Silcer helps can be utilized.

2 – There are some items which will want brims or rafts, use your discretion. When organising my prints I want to be conservative to make sure the least likelihood of a print failure, particularly because the base of many components are hidden when inserted into one other half.

*I used a brim on:
u_hand_right
u_hand_left
u_ear_right
u_ear_left

3 – When eradicating components from the printer mattress, it is a VERY good thought to position left/proper components into separate containers to assist with the meeting course of. Generally the distinction between the left and proper components may be very small however it’s nonetheless value retaining monitor of them (particularly if you happen to dimension up the mannequin considerably) and assembling them of their correct place.

4 – Remember that because of the slope of the pinnacle, there could also be scarring on the again facet from the helps.

..
Meeting ideas:

1 – Take your time gluing the mannequin collectively and benefit from the course of. Dry match all of the components and provides some thought into which components to connect collectively as teams after which gluing the teams collectively. Let the glue for every group set fully earlier than combining teams.

2 – I used 3D Gloop and E6000 to place this mannequin collectively. Every sort of glue has totally different professionals/cons and I discovered that quick drying 3D Gloop was far simpler to make use of than superglue (for me). The E6000 sticky glue permits extra time to place components and remains to be the perfect for smaller components. For each glues utilizing a smaller quantity is normally higher than extra glue.

3 – Gluing this mannequin is straight ahead, nonetheless if you happen to use a sticky gradual drying glue, take further care when gluing within the arms. Do one, let it dry fully after which do the opposite.

4 – An FYI for my fashions. Sometimes the mattress facet of an element is the facet that’s inserted into one other half. For this mannequin the eyeblacks are an exception and the mattress facet faces out, making meeting a lot, a lot simpler for this half.

5 – Consult with the meeting diagrams within the footage part in addition to the uploaded footage for placing the mannequin collectively. The mannequin is supposed to be glued.

As famous at first of this writeup, this mannequin will be accomplished as a stand alone mannequin however can be related to my Riff Raff mannequin. Be aware the slot on the underside of the manhole_cover.

Don’t hesitate to ask questions, suggestions is crucial to creating higher fashions.