3D mannequin description
FanArt Battletech Marauder 3D Mannequin Meeting Package free 3D print mannequin
The 3D mannequin represents a face-lift of Marauder Mech. Identical to the opposite Marauder, the 3D mannequin options ball joints, which improve its workability and operability.
This Marauder 3D mannequin consists of 19 separate components. All components are designed to suit onto 19×19 cm print mattress. They’re created in Autodesk Maya and transformed into STL recordsdata. The recordsdata are checked and corrected in Netfabb.
There’s an in depth video information on the meeting of the 3D mannequin.
https://www.youtube.com/embed/yBiCXnaJ5XQ
This Marauder 3D mannequin with modified seems to be will match completely into the gathering of your 3D printed MWO Mechs.
Extra Superb Battletech (Mechwarriors) Meeting Kits go right here: https://goo.gl/AAIjsS
MWO King Crab + Weapons
BattleMaster 3D Mannequin | Meeting
Kodiak 3D Mannequin | Meeting
Atlas 3D Mannequin | Meeting Motion Determine
Zeus Mech 3D Mannequin | Meeting
Mad Canine 3D Mannequin | Meeting Motion Determine
and and so on right here: https://goo.gl/AAIjsS
3D printing settings
High quality
Layer Peak: 0.1 mm
Preliminary Layer Peak: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Interior Wall(s) Line Width: 0.4 mm
High/Backside Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Assist Line Width: 0.4 mm
Preliminary Layer Line Width: 100%
Shell
Wall Thickness: 0.8 mm
Wall Line Depend: 2
Outer Wall Wipe Distance: 0.2 mm
High Floor Pores and skin Layers: 0
High/Backside Thickness: 0.8 mm
High Thickness: 0.8 mm
High Layers: 8
Backside Thickness: 0.8 mm
Backside Layers: 8
High/Backside Sample: Traces
Backside Sample Preliminary Layer: Traces
High/Backside Line Instructions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Verify
Compensate Outer Wall Overlaps: Verify
Compensate Interior Wall Overlaps: Verify
Fill Gaps Between Partitions: In every single place
Filter Out Tiny Gaps: Verify
Horizontal Growth: 0 mm
Preliminary Layer Horizontal Growth: 0 mm
Z Seam Alignment: Sharpest Nook
Seam Nook Choice: Conceal Seam
Ignore Small Z Gaps: Verify
Additional Pores and skin Wall Depend: 1
Infill
Infill Density: 20% (100% for all components of connectors)
Infill Line Distance: 4.0 mm
Infill Sample: Grid
Infill Line Instructions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Proportion: 10%
Infill Overlap: 0.04 mm
Pores and skin Overlap Proportion: 5%
Pores and skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Peak: 1.5 mm
Infill Earlier than Partitions: Verify
Minimal Infill Space: 0 mm2
Pores and skin Elimination Width: 0.8 mm
High Pores and skin Elimination Width: 0.8 mm
Backside Pores and skin Elimination Width: 0.8 mm
Pores and skin Broaden Distance: 0.8
High Pores and skin Broaden Distance: 0.8
Backside Pores and skin Broaden Distance: 0.8
Most Pores and skin Angle for Growth: 90Ëš
Minimal Pores and skin Width for Growth: 0.0
Materials
Preliminary Layer Move: 100%
Allow Retraction: Verify
Retraction Additional Prime Quantity: 0 mm3
Retraction Minimal Journey: 0.8 mm
Most Retraction Depend: 90
Minimal Extrusion Distance Window: 6.5 mm
Nozzle Change Retraction Distance: 16 mm
Nozzle Change Retraction Pace: 20 mm/s
Nozzle Change Retract Pace: 20 mm/s
Nozzle Change Prime Pace: 20 mm/s
Pace
Print Pace: 45 mm/s
Infill Pace: 50 mm/s
Wall Pace: 22.5 mm/s
Outer Wall Pace: 22.5 mm/s
Interior Wall Pace: 45 mm/s
High/Backside Pace: 15 mm/s
Assist Pace: 45 mm/s
Assist Infill Pace: 45 mm/s
Journey Pace: 60 mm/s
Preliminary Layer Pace: 22.5 mm/s
Preliminary Layer Print Pace: 22.5 mm/s
Preliminary Layer Journey Pace: 30 mm/s
Skirt/Brim Pace: 30 mm/s
Most Z Pace: 0 mm/s
Variety of Slower Layers: 2
Journey
Combing Mode: All
Keep away from Printed Elements when Touring: Verify
Journey Keep away from Distance: 0.6562 mm
Layer Begin X: 0.0 mm
Layer Begin Y: 0.0 mm
Cooling
Allow Print Cooling: Verify
Fan Pace: 100%
Common Fan Pace: 100%
Most Fan Pace: 100%
Common/Most Fan Pace Threshold: 10 s
Preliminary Fan Pace: 0%
Common Fan Pace at Peak: 0.3 mm
Common Fan Pace at Layer: 2
Minimal Layer Time: 5 s
Minimal Pace: 10 mm/s
Assist
Generate Assist: Verify
Assist Placement: In every single place
Assist Overhang Angle: 50°
Assist Sample: Zig Zag
Join Assist ZigZags: Verify
Assist Density: 15 %
Assist Line Distance: 1.3333 mm
Assist Z Distance: 0.3 mm
Assist High Distance: 0.3 mm
Assist Backside Distance: 0.3 mm
Assist X/Y Distance: 1 mm
Assist Distance Precedence: Z overrides X/Y
Minimal Assist X/Y Distance: 0.25 mm
Assist Stair Step Peak: 0.3 mm
Assist Stair Step Most Width: 5.0 mm
Assist Be a part of Distance: 2.0 mm
Assist Horizontal Growth: 0.2 mm
Assist Infill Layer Thickness: 0.1 mm
Gradual Assist Infill Steps: 0
Use Towers: Verify
Tower Diameter: 3.0 mm
Minimal Diameter: 3.0 mm
Tower Roof Angle: 65°
Construct Plate Adhesion
Construct Plate Adhesion Kind: Brim
Skirt/Brim Minimal Size: 250 mm
Brim Width: 8.0 mm
Brim Line Depend: 18
Brim Solely on Exterior: Verify
Mesh Fixes
Union Overlapping Volumes: Verify
Merged Meshes Overlap: 0.15 mm
Particular Modes
Print Sequence: All at As soon as
Floor Mode: Regular
Experimental
Slicing Tolerance: Center
Most Decision: 0.01 mm
Move charge compensation max extrusion offset: 0 mm
Move charge compensation issue: 100%
