Dr Eggman, a personality from Sega’s Sonic the Hedgehog sequence.
Physician Ivo “Eggman” Robotnik is the principle antagonist of Sega’s Sonic the Hedgehog franchise. Eggman is a mad scientist who seeks to steal the paranormal Chaos Emeralds, defeat Sonic the Hedgehog, and conquer the world.
I selected to mannequin the earliest traditional model of him, as he has modified fairly a bit over time.
No helps are required. See notes for printing concerns, contemplating that that is bigger than my typical mannequin.
When you have the right filament colours, no portray is required.
As offered, Dr Eggman is usually in proportion to my earlier Sonic and Tails fashions.
The assembled mannequin with the bottom is 270mm lengthy x 225mm tall x 220mm large. All particular person components match on smaller print beds, utilizing the Prusa Mini as a information.
Get pleasure from!
……………………………………………………………………………………………..
Particular shoutout to maker Benoît Lussier for offering QA printing and high quality suggestions.
Particular due to Jason McMillan (makerworld ID Gatekeeper) for creating the Bambu Print Profile.
……………………………………………………………………………………………..
Print Directions:
Helps: No
Decision: .2mm (see under for printing suggestions)
Infill: 15%
Notes:**
Confer with the notes under for a number of vital printing and meeting directions.
……………………………………………………………………………………………..
Constructing the mannequin
Colours
Black: (Satan Designs PLA – Black)
ship_body_front_black
ship_body_back_black
body_black
engine_black_1
engine_black_2
ship_wing_barrel_left
ship_wing_barrel_right
steering_top (comprises two an identical items)
steering_bottom
small_lights_ring (comprises two an identical items)
arrow_black (comprises each left and proper components, all completely different sizes, see notes)
arrow_extra_black (comprises each left and proper components, see notes)
bomb_connector_bolt
ship_stripes_top (comprises two an identical items)
ship_stripes (comprises 4 an identical items
..
Yellow: (Satan Designs PLA – Brilliant Yellow)
collar
flame_yellow
arrow_yellow (**comprises each left and proper components, all completely different sizes, see notes)
ship_light
engine_hood
small_lights (solely want one of many two an identical items within the file)
..
Purple Sparkle: (Satan Designs PLA – Galaxy Purple)
bomb
..
Blue: (BambuLabs PLA – Blue)
seat
glasses_blue
small_lights (solely want one of many two an identical items within the file)
..
Purple: (Hatchbox PLA – True Purple)
body_red
flame_red
nostril
small_lights (solely want one of many two an identical items within the file)
..
White: (Satan Designs PLA – White)
cloud
hand_right
hand_left
mouth
glasses_white (comprises two an identical components)
..
Aluminum/Silver: (Satan Designs PLA – Aluminum)
ship_body_silver
engine_silver_1
engine_silver_2
engine_silver_3
ship_light_rim
ship_strap
bomb_connector
small_lights_holder (comprises two an identical items)
ship_body_floor
ship_wing_right
ship_wing_left
ship_wing_bottom_right
ship_wing_bottom_left
ship_wing_top_right
ship_wing_top_left
..
Brown: (PolyTerra PLA – Military Brown)
moustashe_right
moustashe_left
..
Pores and skin: (Paramount3d PLA – Common Beige)
head
..
Clear: (unknown PLA – clear)
windshield
..
Any coloration (hidden items)
pin_body
pin_ship_strap
..
……………………………………………………………………………………………..
Printing and meeting suggestions
Printing suggestions
1 – This mannequin is bigger than my typical fashions, please notice the dimensions that’s posted to start with of those notes.
2 – There are some items which will want brims:
- I used brims on:
hand_right
hand_left
arrow_black_extra
For those who use a brim on arrow_black and or arrow_yellow, remember to clear the brims completely for a great match
3 -The next level is relevant to all my fashions, however extra so for this one:
When eradicating components from the printer mattress, it is a VERY good concept to put left/proper components into separate containers to assist with the meeting course of. Typically the distinction between the left and proper components may be very small however it’s nonetheless price retaining monitor of them and assembling them of their correct place.
4 -The arrow_black and arrow_yellow components are offered within the order for meeting. They might appear comparable however every half is exclusive. Personally I put them on a bit of tape within the order I took them out of bed. The bottoms are hidden, so you may also mark them there as nicely. For printability, arrow_back_extra is positioned the other way up. As per the diagram, that is the black tip of the arrow.
5 -The components ship_front_black and ship_back_black print simply however utilizing my go-to printing parameters I had some warping out of bed. Contemplate typical options to keep away from this equivalent to cleansing your mattress earlier than printing these components, use a better print temp, including helper disks to carry the corners of the components down.
..
Meeting suggestions:
1 – Take your time gluing the mannequin collectively and benefit from the course of. Give some thought into which components to connect collectively as teams after which gluing the teams collectively. Let the glue for every group set utterly earlier than combining teams.
2 – I used 3D Gloop and E6000 to place this mannequin collectively. Every sort of glue has completely different professionals/cons and I discovered that 3D Gloop was far simpler to make use of than superglue (for me). The E6000 sticky glue that I additionally use permits extra time to place components and continues to be the perfect for smaller components. For each glues utilizing a smaller quantity is often higher than extra glue.
3 – When inserting the arrow components into the ship, begin from the again and work your means ahead.
4 – The steering has only a slight indent into the ship, so, I discovered it less complicated to insert the steering after Eggman is inserted and simply shift the steering into place beneath the fingers.
4 – The flame_red and flame_yellow match solely a sure means. Do NOT pressure the components, as a substitute rotate the components to search out the proper match.
5 – I’ve divided the meeting diagram into a number of photos for readability, Nevertheless, meeting must be straight ahead so long as left/proper components are separated and the diagrams are referred to intently, particularly for the wings.
6 – Confer with the meeting diagrams within the photos part in addition to the uploaded photos for placing the mannequin collectively. The mannequin is supposed to be glued.
Don’t hesitate to ask questions, suggestions is crucial to creating higher fashions.
