Fingers-On Evaluate: FLSun T1 Professional

Fingers-On Evaluate: FLSun T1 Professional


FLSun T1 Professional: Overview

Firstly, let’s check out the general specs of the FLSun T1 Professional.

The modern wanting machine (pictured beneath) presents a 260*330 mm construct quantity inside its enclosed chamber. Based on FLSun, the inside of the chamber can attain as much as 50C, due to the passive heating from the warmth mattress.

Hands-On Review: FLSun T1 ProHands-On Review: FLSun T1 Pro
FLSun T1 Professional. (Picture Credit score: FLSun)

The enclosed chamber and nozzle (able to melting plastic as much as 300C) is able to printing a wide range of supplies together with PLA, ABS, PA, TPU, and extra. For our assessment, we now have tried PLA, and ABS+ (extra on that later).

Operating on Klipper, the machine could be managed remotely out of your laptop over WiFi, in addition to through the touchscreen interface on the printer itself.

The printer is available in a semi-assembled state, and requires perhaps an hour of labor to get all of it put collectively and up-and-running. As soon as the machine is assembled, it measures XXXXX, and weighs some YYY kg.

The T1 Professional comes with the next options:

  • Extremely-fast print velocity: The T1 Professional operates at as much as 1000mm/s with 30000 mm/s² acceleration. It prints fashions in half the time in comparison with rivals. A Benchy could be printed in about 10 minutes.
  • Low-noise printing atmosphere: The T1 Professional employs a CAPA silent turbine fan, self-developed core motherboard, and optimized firmware, lowering noise from 78dB to 55dB throughout high-speed printing, in comparison with the earlier T1 mannequin.
  • Improved print high quality: The T1 Professional addresses earlier points like salmon pores and skin and poor adhesion by introducing new core algorithms, reminiscent of vibration compensation and enhanced computerized leveling programs.
  • Absolutely computerized leveling: The T1 Professional measures a number of predefined factors on the print mattress utilizing weight sensors to gather top information, eliminating handbook leveling and making the method simpler for customers.
  • Enter shaping algorithm: This function minimizes vibration results, leading to easy and flawless mannequin surfaces, significantly helpful when printing advanced or intricate designs.
  • Twin-gear short-distance extruder: The extruder’s coaxial gears supply higher precision and extrusion pressure, resulting in extra constant materials circulate and improved general print efficiency.
  • Filament detection improve: The improved filament detection system reduces print failures resulting from materials depletion. An optimized algorithm filters unstable indicators from high-frequency filament oscillations throughout ultra-fast printing, guaranteeing correct filament-out alerts.

Moreover, the FLSun T1 Professional comes with the newest launch of their slicing software program, FLSun Slicer 2.0. The brand new slicer options one-click slicing for glorious print high quality and a redesigned consumer interface that simplifies human-computer interplay, lowering the training curve. The optimized slicing path improves printing velocity, whereas the cross-hatch filling path adjustment enhances mannequin high quality. The “Z-Elevate Threshold” function successfully controls stringing in particular filaments, and the added most quantity limitation function is tailor-made to the T1 Professional mannequin.

The FLsun firmware OS has additionally undergone a complete improve, bettering responsiveness and smoothness. Wi-Fi transmission charges have been enhanced for extra steady connections, and storage for time-lapse pictures is optimized for effectivity. The consumer interface has additionally been refined for a extra intuitive expertise.

Unpacking and Meeting

The FLSun T1 Professional is available in a single field, with the primary elements already assembled.

These embody the bottom (with heater and mattress) and the highest lid (with finish stops and different digital components. Additionally included are three structural pillars (every with a stepper motor and delta arm) and the enclosure panels (2 acrylic aspect panels and a glass door). The extruder and scorching finish can also be within the field, in addition to a touchscreen, a couple of fundamental instruments, and a few baggage of screws.

You may see these things within the picture beneath.

The T1 Pro components.
The T1 Pro components.
The T1 Professional elements.

Organising is comparatively straightforward, though becoming the extruder to the arms is a bit bit fiddly.

Total it took me round an hour to assemble the entire unit, which when assembled, appears to be like like this:

The T1 Pro, fully assembledThe T1 Pro, fully assembled
The T1 Professional, absolutely assembled.

Printing with the FLSun T1 Professional

A small amount of PLA filament was included within the field, and on the 3D printer’s reminiscence (3Gb), there could be discovered a wide range of STL recordsdata so you may get printing instantly.

Based on FLSun, these fashions have a excessive first print success fee of 99%, however this declare does appear to use primarily to fashions printed in PLA (extra on this matter later).

Fashions could be loaded onto the printer through the included USB stick, or could be beamed to the machine through WiFi utilizing the FLSun Slicer 2.

The T1 Pro, printing some PLA.The T1 Pro, printing some PLA.
The T1 Professional, printing some PLA.

Earlier than my first print, I adopted the directions and carried out the automated vibration compensation and mattress leveling processes. This was easy and computerized, and took round 5 minutes. After they have been full, I used to be able to print.

I opted for the Benchy, and certain sufficient, the primary layer caught to the print mattress no downside. Naturally, the primary layer just isn’t printed at full velocity, however as soon as the printer moved as much as the following layer, I used to be blown away by the velocity of this factor.

It was so quick, I actually laughed out loud to myself. I went to the kitchen to pop the kettle on and once I obtained again a few minutes later, the mannequin was already taking form and was nearly 25% full.

Monitoring the print via the included webcam.Monitoring the print via the included webcam.
Monitoring the print through the included webcam.

I made a decision to cancel the Benchy print at this level and check out one thing else. Everybody is aware of what a Benchy appears to be like like, and so they’re kinda boring at this level.

I had a print job ready for a consumer, so I made a decision to strive that. This specific object has a 3D lattice (designed in Sulis) inside so I wished to see how this printed. The merchandise must be light-weight and have floor end, so it appeared like a really perfect job for the printer. I sliced my file right into a cross part, so I might view the lattice inside, and commenced the print.

The result’s beneath, and I used to be pleased with the velocity of the print, the floor end, and the standard of the lattice inside.

A successful lattice, printed with PLA.A successful lattice, printed with PLA.
A profitable lattice, printed with PLA.

OK, so it prints quick with PLA, and it appears to don’t have any points with mattress adhesion.

What about with ABS+? The FLSun T1 Professional has an enclosed chamber so may as properly strive some trickier supplies, proper? Proper.

For the ABS+, I used the “cat” STL that was pre-loaded on the machine. On my first try with the ABS+, there was no mattress adhesion in any respect. Ditto the second try.

I elevated the temperature of each the nozzle and the mattress to 255C and 80C respectively, and did an auto mattress stage once more. The primary few layers began printing high quality, so I left my home briefly to go to the native grocery retailer to purchase lunch.

Two of the included modelsTwo of the included models
Two of the included fashions (left) and a vase STL discovered on the web.

To my shock, once I returned there was already a plate of spaghetti ready for me (and never the nice form)! The primary few layers had printed, after which the mannequin had shifted on the mattress, ensuing within the nozzle extruding molten filament into skinny air.

After a pair extra makes an attempt, I gave up and went to buy some glue stick. After making use of a little bit of glue to the print mattress and attempting once more, the mannequin was printed on the primary try.

You may see the timelapse of the print within the video beneath.

I personally would suggest using a glue stick or different mattress adhesive for many 3D printers anyway, no matter how the mattress is coated. On this case, the mattress appears to be a PEI coated metal plate, which is connected magnetically to the warmth mattress.

Smooth finish! One of the included STLs, printed with ABS+ on the FLSun T1 Pro.Smooth finish! One of the included STLs, printed with ABS+ on the FLSun T1 Pro.
Clean end! One of many included STLs, printed with ABS+ on the FLSun T1 Professional.

The thought that there’s a common print mattress floor that works for all filaments, appears to me to be one thing of a fantasy. Even on a $200,000 industrial printer, they modify the print mattress sheet in line with no matter filament is getting used. So, for PLA, we are able to say that this print mattress is totally high quality – however for ABS+ at the very least, you’ll undoubtedly want some glue.

As for different filament supplies, that is nonetheless to be decided on my half.

CatCat
The “Cat” STL file, included with the machine. Printed with ABS+.

Abstract

The FLSun T1 Professional is a perfect selection for customers looking for quick, environment friendly, and dependable 3D printing. With ultra-high speeds of as much as 1000mm/s, it reduces printing time by half whereas sustaining glorious high quality.

The T1 Pro, printing a latticed part.The T1 Pro, printing a latticed part.
The T1 Professional, printing a latticed half.

The quiet operation and improved print options, reminiscent of vibration compensation and computerized leveling, make it extremely user-friendly. Moreover, the T1 Professional presents superior filament detection, dual-gear extrusion, and a redesigned slicing interface for enhanced efficiency. Whether or not printing advanced fashions or utilizing a wide range of filaments, this printer delivers constant outcomes, making it a helpful instrument for any mission.

The T1 Professional launches on October 25, 2024, at 10:00 PM Beijing Time, with an early fowl worth of $399 (usually $500) accessible till November 3. You may safe this restricted supply right here.

Heads up: our content material might comprise affiliate hyperlinks. Should you purchase one thing by a type of hyperlinks, you received’t pay a penny extra, however we’ll get a small fee. Learn extra right here.

FLSun T1 Professional

This modern wanting machine presents a 260*330 mm construct quantity inside its enclosed chamber.

  • – Print dimension: 260(D) x 330(H) mm
  • – comes with enclosure
  • – absolutely computerized leveling
  • – Twin-gear short-distance extruder


Extra particulars »

Leave a Reply

Your email address will not be published. Required fields are marked *