DJI Flip – Preliminary Setup Information (with Video)

The DJI Flip

The DJI Flip is a wholly different-looking drone from something DJI has put out till now. It has a considerably bigger footprint than the DJI Neo and DJI Mini line of drones whereas remaining below the 250g candy spot.

Beginning with the entrance, a gimbal guard and extra protecting silicone sleeve shield the Flip’s three-axis gimbal. 

To take away the gimbal protector, squeeze the protector with 2 fingers and pull the duvet off.

Then you’ll be able to take away the grey silicon digicam protector, utilizing the tab on the facet.

Persevering with across the folded Flip, there are 4 LED markers and an influence button.

To examine the accessible battery energy on the put in battery, press the facility button as soon as.

Turning on/off the DJI Flip may be performed in one in all two methods:

• Unfold the DJI Flip to routinely flip it on and fold it to show it off, or
• Press, then press and maintain the facility button to energy on or off. The Flip will make an audible sign when it activates.

Word: The auto-on and auto-off options may be turned on or off throughout the DJI Fly app, which we’ll talk about on this article.

Turning the Flip as soon as extra, we see that there are two ports and a further button. These are:

• a Micro SD Card slot
• a USB-C port, and
• a Palm Management mode selector

Micro SD Card

It’s good that DJI has returned so as to add a Micro SD Card slot for the DJI Flip, not like the “inside storage solely” of the DJI Neo.

As with most DJI drones, utilizing Micro SD Playing cards as much as 512GB with the Flip is beneficial. There’s a further 2GB of inside cupboard space for when the Micro SD card is left at residence.

When you bought the DJI RC 2 package, there may be additionally an SD card slot within the distant controller. The SD card for the DJI RC2 is used for display screen recording. When you don’t do display screen recording, you can retailer an SD Card within the DJI RC 2 as a backup location for the Flip.

Under is DJI’s present listing of beneficial SD playing cards:

• SanDisk Excessive PRO 32GB V30 U3 A1 microSDHC
• Lexar 1066x 64GB V30 U3 A2 microSDXC
• Lexar 1066x 128GB V30 U3 A2 microSDXC
• Lexar 1066x 256GB V30 U3 A2 microSDXC
• Lexar 1066x 512GB V30 U3 A2 microSDXC
• Kingston Canvas GO! Plus 64GB V30 U3 A2 microSDXC
• Kingston Canvas GO! Plus 128GB V30 U3 A2 microSDXC
• Kingston Canvas React Plus 64GB V90 U3 A1 microSDXC
• Kingston Canvas React Plus 128GB V90 U3 A1 microSDXC
• Kingston Canvas React Plus 256GB V90 U3 A1 microSDXC
• Samsung EVO Plus 512GB V30 U3 A2 microSDXC

» MORE: How one can Format SD Playing cards in DJI Drones (Fast Steps with Images)

USB-C Port

Much like many DJI drones, the USB-C port is used to do the next:

• cost a single battery when put in within the Flip
• switch footage from the Flip’s 2GB inside storage to a pc or cell system

Palm Management Flight Modes

Just like the DJI Neo clever flight modes, the DJI Flip Palm Management flight modes are:

• Comply with
• Dronie
• Circle
• Rocket
• Highlight
• Path Observe

To decide on the flight mode, press the mode choice button till you find your required mode. 

Essential Notes: To make use of palm management, flip off or guarantee any of the related distant controllers for the Flip are turned off. Palm management modes are additionally restricted to a peak of 98 ft and a distance of 164 ft.

Sensors

Turning the Flip over, we see that it has two sensors on the underside. Whereas it’s not fully shielded from all sides, just like the Mini 4 Professional or Air 3 collection, the sensors do help in flight and a few safety.

The primary sensor set is downward going through, with one visible sensor and an infrared sensor. These guarantee exact hovering, enabling the Flip to stay steady in low-wind conditions.

The second sensor is the front-facing, 3D Infrared Sensing System.

The Flip’s 3D Infrared Sensing System is a forward-facing impediment detection system. It makes use of infrared know-how to determine obstacles in entrance of the drone, which permits it to routinely brake and keep away from collisions. The distinctive side is that this method works even in low-light situations or at night time.

Clever Flight Batteries

The clever flight batteries present the Flip with as much as 31 minutes of flight time.

To take away the battery, concurrently press the tabs on the facet of the battery and elevate and slide out the battery. To place the battery again in, align the grooves on the battery with these on the Flip and slide the battery in. You’ll hear a click on when the battery sits appropriately.

To Cost the Batteries

There are two alternative ways to cost the Flip’s batteries.

As with most of DJIs latest drones, a wall charger will not be included. Whereas DJI suggests utilizing their 65-watt charger, in addition they acknowledge that any 65-watt and even 100-watt PD charger will work properly. This has additionally been our expertise, as we use third celebration PD chargers.

Word: We recommend a 100-watt PD charging hub, which is able to enable one to cost the distant controller and battery hub concurrently when you have a Flymore Combo.

In case you have both the DJI RC-N3 or DJI RC 2 solely package, you will have to cost the Flip’s battery whereas it’s inserted into the Flip.

To cost the only battery throughout the Flip, find the USB-C port on the left facet of the Flip. Plug the equipped USB-C charging cable into the port after which into your charger.

In case you have the Fly Extra Combo, with the three batteries and battery hub, it is possible for you to to cost all three batteries within the hub. Moreover, in case you are utilizing a charger rated at 65 watts, two batteries may be charged within the hub concurrently.

To examine how a lot battery energy is left within the batteries, whereas within the charging hub, press the facility button on the facet of the hub.

To cost the batteries throughout the battery hub, guarantee they’re totally seated within the hub. Plug the charger (ideally not less than 65 watts) into an outlet after which plug within the equipped USB-C cable into the hub. After a second you will note the batteries start to cost.

RC-N3, and DJI RC 2 Controllers

Whether or not you may have an RC-N3 RC 2 distant controller, additionally, you will must cost the RC.

To cost both the RC-N3 or DJI RC 2 Distant Controller, find the USB-C port on the underside of the controller and plug it in. 

When charging begins, the LEDs on the entrance of the distant controller will start to blink, signifying charging.

There’s a handy function constructed into the Flip’s charging hub. With batteries hooked up to the hub, you should utilize the hub to cost varied digital units.

To cost units by means of the charging hub (together with the DJI Distant Controllers), plug one finish of your DJI-supplied USB-C knowledge cable into the charging hub.

STEP 2: Plug the opposite finish of the USB-C cable into your system.

STEP 3: With all three batteries inserted into the charging hub, press and maintain the facility button for about 3-5 seconds, till you see your system start charging, then cease holding the facility button.

DJI Fly Software program

With all the batteries charged and able to go, there’s a essential step wanted to begin flying the Flip.

You have to to have the DJI Fly app put in in your telephone when you have the RC-N3. DJI Fly is already put in on the DJI RC 2.

If utilizing an iPhone, you’ll be able to seek for the DJI Fly app within the Apple App Retailer.

The DJI Fly app for Android is barely accessible on-line on DJI’s web site.

The place to Obtain DJI Fly

In case you have the DJI RC-N3 combo, you will have to put in the DJI Fly software program in your digital system.

In case you are utilizing both an Android or iOS telephone, the hyperlinks to obtain the DJI Fly app are as follows:

Moreover, out of your Android system, you are able to do a Google Seek for “DJI Obtain Middle”.

Within the outcomes, select DJI Fly and you may be dropped at the software program downloads web page.

Word: the DJI Fly app for Android is barely accessible on-line on the hyperlink above, and is now not accessible within the Google Play retailer, whereas the iOS model for Apple units is accessible by way of the App Retailer.

Organising or logging into your DJI Account

Now that you’ve got the DJI Fly app put in, it’s time to arrange your DJI Account. You possibly can both accomplish that from throughout the app in your cellphone, or utilizing the DJI RC 2.

In case you have a DJI RC 2:

It’s suggested that for the preliminary setup, you connect with your DJI RC 2 whereas close to your own home WiFi. In case you are setting the Flip up away from residence, you’ll be able to connect with your telephone’s hotspot.

STEP 1: Activate the RC 2 by urgent as soon as on the facility button, then instantly press and maintain the facility button.

After the DJI splash display screen seems, try to be dropped at the “Welcome to DJI RC-2” display screen.

STEP 2: Scroll by means of the listing and select your language. After selecting your language hit NEXT.

STEP 3: Settle for the phrases and situations and press AGREE.

STEP 4: Select your Nation/Area and press NEXT.

You’ll then be prompted to hook up with Wifi (or your hotspot)

Word: You’ll want to hook up with WiFi if establishing a DJI account by means of the DJI RC 2.

Connecting to WiFi

STEP 1: Select your WiFi community from the listing of energetic networks.

STEP 2: Enter your WiFi or hotspot password. After getting into the password press the blue checkmark then press OK on the prime proper of the display screen.

STEP 3: Choose your Time Zone by tapping the present timezone on the display screen (which may be Beijing). Then scroll by means of the listing till you discover your present timezone. Press NEXT.

STEP 4: Press verify on the Word that pops up.

STEP 5: In case you have a DJI account you’ll be able to log in right here or you’ll be able to select “Create account”.

In case you have an RC-N3

STEP 1: When you’d wish to create a model new account utilizing the DJI RC-N3, with out being related to the RC-N3, from a cellphone or good system, launch the DJI Fly app and go into Profile.

STEP 2: As soon as within the Profile Display, go to Log In.

STEP 3: Enter the telephone or electronic mail you wish to register with and examine off the “I’ve learn” part on the backside.

If you have already got a DJI Login, enter that data right here.

STEP 4: In case you are creating your DJI Account for the primary time, enter the password you wish to use.

STEP 5: Enter the Captcha information and submit.

You’ll now be dropped at the primary profile web page. You will notice you may have been arrange as a generic DJI Person.

STEP 6: To vary your title and profile image, faucet your present djiuser_ title (it will convey you to the Profile particulars web page, and you’ll change your DJI username to no matter you’d like, in addition to add a profile image.

Updating Firmware

After you may have efficiently created or logged into your DJI Account with both the DJI RC-N3 or RC 2, you’ll be offered with the choice to put in the most recent firmware.

It’s advisable to replace the firmware (on any DJI drone), as new firmware ensures the Flip has all the present options and bug fixes.

To replace the firmware you will have to have the DJI Flip powered on, together with both the DJI RC-N3 or DJI RC 2.

STEP 1: With the distant controller on and related to both WiFi or your system’s mobile knowledge, take away the gimbal cowl and grey silicon digicam protector from the DJI Flip.

STEP 2: Unfold the Flip’s arms/motors. This could energy on the Flip. In case your Flip doesn’t routinely energy on, manually energy on the Flip with a single press, then press and maintain the facility button.

After the Flip connects to DJI Fly, you might be requested to Activate your Flip. Select the choices that finest fit your wants.

STEP 3: After activating the Flip, it’s best to obtain a message that there are firmware updates accessible. Select UPDATE.

You will notice a proportion animation displaying the set up course of.

The preliminary firmware replace might take 5 to 10 minutes. Your DJI RC 2 or RC-N3, in addition to the DJI Flip, will reboot quite a lot of instances. Let the method run totally.

As soon as the replace is full, you might must manually energy on the Flip to prepare in your preliminary flight.