Adafruit HalloWing M0 Specific #Adafruit #Feather @MicrochipMakes « Adafruit Industries – Makers, hackers, artists, designers and engineers!


The Adafruit Feather ecosystem is so wealthy with {hardware} range, we wished to share them, one every day. Right now is the Adafruit HalloWing M0 Specific!

Are you the form of one who doesn’t like taking down the skeletons and spiders till after January? Nicely, we’ve acquired the event board for you. That is electronics at its most spooky! The Adafruit HalloWing is a skull-shaped ATSAMD21 board with a ton of extras inbuilt to make for an lovable wearable, badge, improvement package, or the engine in your subsequent cosplay or prop.

On the entrance is a cute 1.44″ sized 128×128 full coloration TFT. Our default instance code has our spooky eye demo working however you should use it for something you wish to show in superb coloration.

There’s additionally 4 fang-teeth beneath the show, these are analog/capacitive contact inputs with huge alligator-clip holes.

On the reverse is a smorgasbord of digital goodies:

  • ATSAMD21G18 @ 48MHz with 3.3V logic/energy – 256KB of FLASH + 32KB of RAM
  • 8 MB of SPI Flash for storing photographs, sounds, animations, no matter!
  • 3-axis accelerometer (movement sensor)
  • Mild sensor, reverse-mount in order that it factors out the entrance
  • Mono Class-D speaker driver for 4-8 ohm audio system, as much as 2 Watts, with mini quantity pot
  • LiPoly battery port with inbuilt recharging functionality
  • USB port for battery charging, programming and debugging
  • Two feminine header strips with Feather-compatible pinout so you’ll be able to plug in any FeatherWings
  • JST ports for Neopixels, sensor enter, and I2C (you’ll be able to match I2C Grove connectors in right here)
  • 3.3V regulator with 500mA peak present output
  • Reset button
  • On-Off swap

OK so technically it’s extra like a very tricked-out Feather M0 Specific than a Wing however we merely couldn’t resist the Hallowing pun.

Proper now you should use the Hallowing equally Feather M0 Specific, it’s acquired the identical chip though the pins have been rearranged. We’ve acquired each Arduino and CircuitPython construct help for it so you’ll be able to choose your favourite improvement language! The additional 8 MB of SPI Flash is nice for sound results tasks the place you wish to play as much as 3 minutes of WAV recordsdata.

On either side of the HalloWing are JST-PH plugs for connecting exterior gadgets. The three-pin JSTs hook up with analog pins on the SAMD21, so you should use them for analog inputs. We label one for Neopixel and one for Sensors since we predict most individuals can have one in all every. The 4-pin JST connector connects to the I2C port and you’ll match Grove connectors in it for extra {hardware} help.

USE

The Adafruit Hallowing M0 Information offers all the small print and use examples.

Tasks:

Would you wish to see this Feather in motion? Try the undertaking beneath:

In inventory! You should buy the Adafruit HalloWing M0 Specific within the Adafruit store. Video:

Adafruit publishes a variety of writing and video content material, together with interviews and reporting on the maker market and the broader know-how world. Our requirements web page is meant as a information to finest practices that Adafruit makes use of, in addition to a top level view of the moral requirements Adafruit aspires to. Whereas Adafruit shouldn’t be an impartial journalistic establishment, Adafruit strives to be a good, informative, and optimistic voice inside the group – test it out right here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, take part! adafruit.com/mastodon

Cease breadboarding and soldering – begin making instantly! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and extra. Construct tasks with Circuit Playground in a couple of minutes with the drag-and-drop MakeCode programming web site, be taught pc science utilizing the CS Discoveries class on code.org, bounce into CircuitPython to be taught Python and {hardware} collectively, TinyGO, and even use the Arduino IDE. Circuit Playground Specific is the most recent and finest Circuit Playground board, with help for CircuitPython, MakeCode, and Arduino. It has a strong processor, 10 NeoPixels, mini speaker, InfraRed obtain and transmit, two buttons, a swap, 14 alligator clip pads, and plenty of sensors: capacitive contact, IR proximity, temperature, gentle, movement and sound. An entire vast world of electronics and coding is ready for you, and it suits within the palm of your hand.

Have a tremendous undertaking to share? The Electronics Present and Inform is each Wednesday at 7pm ET! To affix, head over to YouTube and take a look at the present’s reside chat – we’ll submit the hyperlink there.

Be a part of us each Wednesday evening at 8pm ET for Ask an Engineer!

Be a part of over 36,000+ makers on Adafruit’s Discord channels and be a part of the group! http://adafru.it/discord

CircuitPython – The simplest option to program microcontrollers – CircuitPython.org

Get the one spam-free each day e-newsletter about wearables, working a “maker enterprise”, digital suggestions and extra! Subscribe at AdafruitDaily.com !

No feedback but.

Adafruit has a “be wonderful to one another” remark coverage. Assist us hold the group right here optimistic and useful. Stick with the subject, be respectful of makers of all ages and talent ranges. Be form, and do not spam – Thanks!

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles