The DJI O4 Air Unit Professional is likely one of the most fun FPV product releases of 2025. This digicam and video transmitter combo is able to transmitting and recording HD video that rivals high-end motion cameras. By eliminating the necessity for a separate motion digicam, the O4 Air Unit Professional reduces weight, lowers value, and simplifies your FPV drone setup. Right here’s an in-depth take a look at what units the O4 Professional aside, the place it may enhance, and the way it stacks up in opposition to the DJI O3.
Prepared to put in and arrange the DJI O4 Air Unit Professional in your FPV drone? Try my full setup information right here: [xxx guide coming soon… stay tuned].
Two Variations
DJI launched the O4 Air Unit in two variations, every catering to totally different FPV drone wants:
- DJI O4 Air Unit (aka O4 Lite): Compact and budget-friendly, weighing beneath 10 grams.
- DJI O4 Air Unit Professional (aka O4 Professional): A high-end possibility full of superior options.
This evaluation focuses on the O4 Professional. For particulars on the O4 Lite, take a look at my devoted evaluation: [xxx will be published on a later date].
The place to Purchase
You should buy the DJI O4 Air Unit Professional from the next retailers:
Design, Measurement, and Weight
The O4 Air Unit Professional introduces a number of design enhancements over the O3, together with the brand new heatsink fins to boost cooling efficiency.
They’ve returned to the twin antenna design – each antennas are LHCP (left hand circularly polarized).
The O4’s digicam is considerably bigger than the O3’s, permitting for a bigger picture sensor.
Regardless of being barely bigger in total dimensions than the O3 (32.6 x 30.7 x 14.1mm vs. O4 Professional’s 33.4 x 33.1 x 13.1mm), the O4 Professional is notably lighter—about 7 grams lower than the O3.
Right here’s the size of the O4 Air Unit Professional:
- Air Unit Dimensions: 33.4 x 33.1 x 13.1 mm
- Digital camera Dimensions: 25 x 23 x 20 mm
- Antenna Size: 50mm wire + 54mm (3.5mm OD plastic tube)
- Digital camera Wire Size: 130 mm
- Flight Controller Cable: 100 mm
- Weight: 32.5g
O4 vs. O3: Key Variations
Is the O4 higher than the O3? Completely. The O4 outshines the O3 in practically each facet.
Right here’s a fast comparability of the important thing options:
Function | DJI O4 Professional Air Unit | DJI O3 Air Unit |
---|---|---|
Max Reside Feed | 1080p 60Mbps | 1080p 50Mbps |
Onboard Recording | 4K 60/120FPS at 130Mbps, helps D-Log M | 4K 60/120FPS at 150Mbps, no D-Log M (solely help D-Cinelike) |
Storage | MicroSD Card Slot + 4GB Inner Reminiscence | MicroSD Card Slot + 20GB Inner Reminiscence |
OSD Assist | Betaflight | Betaflight |
Picture Sensor | 1/1.3″ F2.8 | 1/1.7″ F2.8 |
Antenna | Twin Antenna | Twin Antenna |
Constructed-in Stabilization | RockSteady | RockSteady |
Max RF Output | 33dBm | 30dBm |
Marketed Vary | 13km | 10km |
Enter Voltage | 7.4V – 26.4V (2S to 6S) | 7.4V – 26.4V (2S to 6S) |
Digital camera Measurement | 20mm vast | 20mm vast |
Air Unit Measurement | 33.5 x 33.5 x 13mm | 30.5 x 30.5 x 14.5mm |
Mounting Choices | 20×20mm and 25.5×25.5mm | 25.5 x 25.5mm (M1.6 screws) |
Weight | 32g | 39.5g |
Value | $229 | $229 |
Picture High quality
The DJI O4 Professional’s digicam receives a major improve over DJI O3, now that includes a bigger 1/1.3-inch sensor that enhances low-light efficiency and total picture high quality.
[xxx place holder for side-by-side comparison to the O3]
One of many standout enhancements is the O4 Professional’s dynamic vary and shadow element. It captures way more info in darker areas, making it superior to the O3, Walksnail Moonlight, and even my GoPro Hero 11 in each daylight and low-light situations. The bigger sensor allows the O4 Professional to collect extra mild, leading to improved readability and a broader vary of brightness ranges, particularly in difficult lighting situations.
For FPV pilots, the dwell feed you see within the goggles is spectacular. The O4 Professional streams 1080p video at 60Mbps to the DJI Goggles N3 and Goggles 3 (and 1080p at 50Mbps to Goggles 2 and Integra). This matches the DJI Avata 2 by way of efficiency.
Onboard Recording
Right here’s a pattern footage of the Avata 2 which makes use of the identical digicam:
The O4 Air Unit Professional helps 4K recording at as much as 120fps and presents D-Log M, preferrred for shade grading in put up modifying. D-Log M ends in a flat, neutral-looking video feed, however DJI presents an in-goggle mode that enhances shade and distinction of the dwell view for pilots with out affecting the recorded footage. Very good.
With a recording bitrate of 130Mbps, barely decrease than the O3’s 150Mbps, the distinction is negligible for many customers, as platforms like YouTube compress movies anyway to a lot decrease bitrate.
The O4 Professional contains 4GB of onboard reminiscence, a lot lower than the O3’s 20GB. Nonetheless, this could be a lifesaver if you overlook your SD playing cards, guaranteeing you gained’t go dwelling empty handed. For expanded storage, the unit helps microSD playing cards as much as 512GB.
Vary and Penetration
In FCC mode, the DJI O4 Air Unit Professional’s output energy can attain as much as 1200mW on the 5.8GHz band, whereas in CE mode, the utmost is barely 25mW. Nonetheless, DJI has launched the flexibility to make use of the 5.2GHz band at as much as 100mW for CE customers, however this solely works in Auto mode. In the event you manually choose 100mW in guide mode, the facility will nonetheless default to 25mW on 5.8GHz.
DJI claims the Max Transmission Vary with goggles 3 and N3 is 15km (FCC) or 8km (CE). Nonetheless, I think it would exceed that. DJI’s FPV programs are recognized to have a tough vary restrict, which is said to software program constraints relatively than {hardware}. The precise laborious restrict for the DJI 04 Air Unit is at present unknown. For reference, the DJI Avata (V1) utilizing the O3 system is marketed at max 10km vary, however has a real-world laborious vary cap of 23km. Additional testing is required to verify this.
With Goggles 3, now you can choose a 60MHz bandwidth (60Mbps bitrate), whereas Goggles 2 is proscribed to 40MHz (50Mbps bitrate). Wider bandwidth usually presents higher vary, penetration, and picture high quality when flying alone. Nonetheless, in my testing, the efficiency distinction between 40MHz and 60MHz is there, however not like evening and day. In the event you’re flying with others, a wider bandwidth could cause extra interference. To reduce this, think about using a decrease bandwidth or, higher but, Race Mode.
Energy Degree Choices
The O4 Air Unit permits guide energy changes, not like the O3, which mechanically manages energy ranges. The facility stage choices are: Auto, 25mW, 50mW, 100mW, 200mW, 400mW, 700mW, and 1200mW.
- FCC Mode: Extra channels can be found, and as much as 1200mW output energy.
- CE Mode: Restricted to 25mW on the 5.8GHz band. Nonetheless, in Auto mode, it will possibly swap to the 5.2GHz band and use 100mW.
FCC Unlock
You may unlock FCC mode on the O4 Air Unit utilizing the identical ham file hack because the O3. This unlock supplies extra channels and full energy ranges, supplied you’re flying in a rustic the place FCC operation is authorized.
I’ll present step-by-step directions for enabling this characteristic in my upcoming setup information. Keep tuned! [xxx link to tutorial]
Racing Mode
The brand new Racing Mode guarantees to scale back latency to as little as 15ms on the O4 Professional and 20ms on the O4 Lite when used with Goggles 3 (G3) and N3. This may very well be a game-changer for FPV racers, or these after the bottom attainable latency. Further benefits embody the usage of normal Race Band channels and cleaner transmission, making it preferrred for flying in teams with lowered interference.
Word that Racing Mode is barely obtainable with Goggles 3 and N3 and is not supported on Goggles 2 or Integra.
[xxx place folder for image quality comparison]
Latency
The marketed lowest latency for the O4 Professional is as follows:
O4 Professional | |
---|---|
Goggles 3 | 15 ms (Race Mode) |
Goggles N3 | 19 ms (Race Mode) |
Goggles 2/Integra | 30 ms (Regular Mode) |
From my expertise, the latency is akin to, if not higher than, the O3 system and is completely flyable for freestyle. Word that these latency figures apply to Racing Mode; in Regular Mode, latency is predicted to be larger.
Whereas altering decision has no obvious impact on latency, body charge does. 100fps supplies the bottom latency, however it is just obtainable in 1080p. The rating of body charges by latency is:
- 100fps (lowest latency, 1080p solely)
- 50fps (second lowest latency, obtainable in any respect resolutions)
- 60fps and 120fps
- 30fps (highest latency)
Video body charge vs. what you’re seeing within the G3, G2 and Integra:
Video Body Fee | G3, G2, Integra Goggles Body Fee |
120fps | 60fps |
100fps | 100fps |
60fps | 60fps |
50fps | 50fps |
30fps | 30fps |
For N3 goggles, the best body charge is 50fps. Whilst you can choose 100fps, the N3 show solely helps as much as 60Hz, which means the body charge can be halved (to 50fps) within the goggles, leading to barely larger latency in comparison with 60fps.
Video body charge vs. what you’re seeing within the N3:
Video Body Fee | N3 Goggles Body Fee |
120fps | 60fps |
100fps | 50fps |
60fps | 60fps |
50fps | 50fps |
30fps | 30fps |
Mounting in FPV Drone Body
On the VTX aspect, the DJI O4 Air Unit is basically much like the O3, so most frames designed for the O3 also needs to work with the O4. The O4 presents extra mounting flexibility with 20x20mm mounting on one aspect and 25.5×25.5mm mounting on either side. That is an improve over the O3, which solely supported 25.5×25.5mm. The O4 additionally makes use of all M2 screw holes as an alternative of the smaller M1.6, making it extra sturdy and user-friendly.
The actual problem lies in becoming the digicam within the body. The O4 digicam is considerably bigger than the O3 digicam, although each have a 20mm width. The O4’s elevated size and “distinctive” screw gap spacing imply that almost all frames designed for the O3 gained’t accommodate the O4 digicam. For some frames, custom-designed 3D-printed mounts could also be required, however in case you’re buying a brand new body for the O4, be sure that it’s appropriate to keep away from surprises.
The O4 digicam options two M2 screw holes with a 16mm spacing between them, a wierd mounting sample that’s unlikely to work with current frames.
Professional Tip: When mounting the O4 Professional, use spacers beneath the Air Unit to make sure the USB-C port is accessible, because it sits proper on the sting and may very well be blocked with out correct spacing.
Pinout and Connection
The pinout and wiring for the O4 Air Unit are similar to the O3 (VCC, GND, RX, TX, GND, SBUS), and the enter energy necessities stay the identical. In the event you’re upgrading from the O3, you may unplug the O3 and plug within the O4 straight with out modifying your flight controller wiring.
Moreover, the O4 contains solder pads for direct soldering, a welcome enchancment for {custom} builds that provides flexibility for non-standard setups.
Digital camera Compatibility
The cameras within the O4 Professional, O4 Lite, and O3 will not be interchangeable. The coaxial cables for the O4 and O3 cameras will not be appropriate. Whereas the O4 Professional and O4 Lite use the identical MIPI connector, connecting the O4 Lite digicam to the O4 Professional Air Unit (or vice versa) doesn’t work.
Goggles Compatibility
The O4 Professional and O4 Lite Air Items are appropriate with the DJI Goggles 3, Goggles N3, Goggles 2, and Goggles Integra. Nonetheless, there are key variations in performance throughout the goggles:
- Goggles 3 and N3: Assist all of the options of the O4 Air Items, though the N3’s show is proscribed to 60Hz.
- Goggles 2 and Integra: Restricted to a most bitrate of 50Mbps and don’t help Race Mode.
Regardless of the O4 transmitting solely 50Mbps to the Goggles 2, it performs admirably, providing picture high quality and vary akin to the Goggles 3 with 60Mbps transmission. This makes the Goggles 2 a extra versatile alternative, as they’re appropriate with the DJI O3 in addition to older programs just like the Vista and FPV Air Unit.
Distant Compatibility
The O4 Professional has a built-in radio management hyperlink, permitting it for use with DJI’s remotes with out requiring a third-party radio receiver. The appropriate remotes are:
- RC2: Works with Goggles 2 and Integra solely.
- RC3: Works with Goggles 3 and N3 solely.
Whereas DJI’s remotes are handy, I personally advocate radios from manufacturers like Radiomaster or Jumper, paired with ExpressLRS. These provide superior management precision, higher ergonomics, superior options and efficiency.
Heating Efficiency
To this point, I haven’t encountered any overheating points with the O4 Professional, probably due to the chilly winter temperatures the place I dwell (5–10°C). The improved heatsink design ought to present ample thermal efficiency in hotter climates, however additional testing in scorching climate can be wanted to verify this.
Specs
Right here’s the complete specs of the DJI O4 Air Unit Professional:
- FPV Reside Feed:
- 1080p 30/48/50/60/100fps
- 60Mbps on Goggles 3 and N3, 50Mbps on Goggles 2 and Integra
- Lowest Latency:
- DJI Goggles 3 in Racing Mode: 15ms
- DJI Goggles N3 in Racing Mode: 19ms
- DJI Goggles 2 or Goggles Integra: 30ms
- Onboard Recording: As much as 4K 60FPS at 130Mbps, helps D-Log M
- Storage: Constructed-in 4GB + MicroSD Card Slot (as much as 512 GB)
- OSD Assist: Betaflight & iNav
- Antenna: Twin Antenna
- Constructed-in Stabilization: RockSteady 3.0
- Digital camera:
- Picture Sensor: 1/1.3″ CMOS
- FOV: 155°
- Aperture: f/2.8
- Digital camera FOV Mode: Normal, Extensive, Extremely Extensive
- Video Decision:
- 4K (4:3): 3840 x 2880@30/48/50/60fps
- 4K (16:9): 3840 x 2160@30/48/50/60/100/120fps
- 2.7K (4:3): 2888 x 2016@30/48/50/60fps
- 2.7K (16:9): 2688 x 1512@30/48/50/60/100/120fps
- 1080P (4:3): 1440 x 1080@30/48/50/60/100/120fps
- 1080P (16:9): 1920 x 1080@30/48/50/60/100/120fps
- Working Frequency:
- 5.170-5.250 GHz
- 5.725-5.850 GHz
- Most RF Output:
- Enter Voltage: 7.4-26.4 V
- Mounting Choices: 20×20mm and 25.5×25.5mm
- Dimensions:
- Transmission Module: 33.5 × 33.5 × 13 mm (L × W × H)
- Digital camera Module: 25.55 × 20 × 23.30 mm (L × W × H)
- Coaxial Cable: 140 mm
- 3-in-1 Cable: 100 mm
- Antenna: 110 mm
- Weight:
- Air Unit (exc. digicam module): 15.6g
- Air Unit (inc. digicam module): 32.0g
- Antenna: 2.1g every
Energy Consumption
(xxx place holder – Knowledge to be added quickly…)
Can it Change GoPro?
For informal FPV pilots, the DJI O4 Professional can completely substitute a GoPro. The hole in picture high quality between the O4 Professional and high-end motion cameras has narrowed considerably, and the load financial savings are an enormous bonus. Nonetheless, for skilled work, there are nonetheless benefits to utilizing a separate motion digicam.
Just like the O3, altering video settings on the O4 impacts what you see within the goggles, together with publicity, body charge, and shade, which may impression your flying expertise. DJI has not too long ago added a mode to the goggles to enhance the look of the video feed when utilizing D-Log M, which is a welcome addition. Additionally, it’s price noting that 10-bit shade continues to be not obtainable on the O4.
Bare Model Risk
Taking the O4 Professional aside is surprisingly easy—simply take away 4 M2 screws.
This straightforward development makes it possible to decase the O4 Professional and switch it right into a “bare” model to save lots of weight, much like the bare O3. Whereas it would probably overheat sooner with out the casing appearing as a heatsink, correct airflow may mitigate this subject. We’ll want to attend for somebody to design 3D-printed or CNC spacers to make this mod occur.
Downsides
Regardless of its spectacular options, the O4 Professional has just a few drawbacks:
- No audio: Neither the dwell feed nor the recordings embody audio.
- Restricted excessive body charge choices: 100fps in 4:3 mode is barely obtainable in 1080p. That is disappointing in comparison with the O3, which supported 2.7K at 4:3. Pilots preferring flying in 4:3 mode are compelled to file in 1080p, which seems like a step again.
- Onboard storage: The O4 Professional contains solely 4GB of onboard storage, considerably lower than the 23GB obtainable on the O4 Lite. Whereas it’s a pleasant backup, it will have been higher to match the Lite’s storage capability.
These shortcomings is probably not dealbreakers for many pilots, however they’re price contemplating when deciding whether or not to put money into the O4 Professional.
Ought to You Select the Lite or Professional?
The DJI O4 Lite is small, light-weight, and helps decrease voltages, making it extra appropriate for smaller FPV drones like 3-inch or smaller quads. Nonetheless, in case your main aim is to seize the highest high quality footage on a small cinewhoop, the O4 Professional is the higher alternative. The extra weight is properly price it for the improved options and picture high quality.
The O4 Lite has barely larger latency than the Professional, each in Regular mode and even in Race Mode (15ms vs. 20ms). The O4 Professional additionally boasts a wider discipline of view, making it higher fitted to picture stabilization, and contains an SD card slot for storage growth. It additionally helps extra decision choices. If dimension and weight aren’t constraints, the Professional is the clear winner.
However, if weight saving is your precedence, the Lite is a compelling possibility as a result of its compact design and shockingly mild weight.
Ought to You Select the Avata 2 or an FPV Drone with O4?
For superior pilots, the O4 Air Unit Professional is the superior alternative. It presents unmatched flexibility, permitting you to put in it in any FPV drone you need. With no velocity or top limits, it’s extremely customizable, repairable, and extra highly effective than the Avata 2.
Nonetheless, the Avata 2 is way extra beginner-friendly. It has a a lot decrease studying curve—there’s no want for constructing or soldering. Merely take it out of the field, and also you’re able to fly.
I’ve beforehand in contrast the Avata 2 to a custom-built 5-inch FPV drone, and a lot of the factors stay related: https://oscarliang.com/avata-2-vs-5inch-fpv-drone/.
ND Filter
To realize cinematic footage, ND filter is a should. Learn to use ND filter on this tutorial: https://oscarliang.com/nd-filter-fpv/
Current Avata 2 ND filters will match the DJI O4 Professional digicam. The official ND filters from DJI could be of nice high quality, however they’re fairly costly. These filters can pop off and get misplaced throughout collisions, so choosing extra reasonably priced ND filters could be possibility for these on a price range.
Get it right here:
SD Card Suggestions
SD playing cards will not be included, so listed below are my suggestions: https://oscarliang.com/sd-cards-fpv/#GoPro-DJI-and-Different-HD-Cameras-4K-Movies. When capturing cinematic footage in dangerous areas, I at all times carry just a few SD playing cards with me and swap them out after each flight. This minimizes the danger of dropping all my footage if the drone is misplaced.
Ultimate Ideas
The DJI O4 Air Unit Professional units a brand new normal for FPV programs, combining distinctive picture high quality, versatility, and efficiency. Its bigger sensor, improved dynamic vary, and onboard 4K recording make it a compelling possibility for each informal pilots and professionals. Whereas it has some limitations, such because the difficult digicam mounting, the O4 Professional is a strong improve from its predecessor, the O3. Whether or not you’re a freestyle fanatic, a racer, or a cinewhoop builder, the O4 Professional presents options and efficiency that justify its worth. For pilots seeking to push their FPV setups to the following stage, the O4 Professional is a wonderful alternative.
You should buy the DJI O4 Air Unit Professional from the next retailers:
Edit Historical past
- Nov 2024 – Leaked information revealed.
- Jan 2025 – Up to date with official specs and information