Assessment: Speedybee Mario 5 FPV Drone – Funds Choice with High Notch Efficiency and Construct High quality

Assessment: Speedybee Mario 5 FPV Drone – Funds Choice with High Notch Efficiency and Construct High quality


The SpeedyBee Mario 5 FPV Drone is lastly right here, providing an reasonably priced choice for many who need a succesful FPV drone with out the effort of constructing from scratch. Primarily based on SpeedyBee’s not too long ago launched Mario 5 body, this drone requires solely a receiver to be flight-ready. Right here’s my in-depth have a look at the Mario 5, from unboxing to flight efficiency, and my last verdict on whether or not it’s price including to your FPV fleet.

A few of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) when you make a purchase order after clicking on one among these affiliate hyperlinks. This helps assist the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra data.

The place to Purchase

You should buy the Mario 5 FPV Drone from:

Totally different Choices

The SpeedyBee Mario 5 sequence contains two variations: one with out an FPV system and one other with the DJI O3 Air Unit. Each fashions share the identical flight controller, ESC, and body.

The Mario 5 can be accessible in two body configurations:

  • X Body: Provides extra exact dealing with, preferrred for freestyle flying. Nevertheless, when utilizing the DJI O3, you may see the propellers in view, which might be distracting for cinematic photographs.
  • Deadcat Body: Retains the propellers out of view when utilizing an motion digicam or the DJI O3, good for cinematic footage. If capturing clean video is your precedence, I’d suggest the deadcat body.

I’m reviewing the deadcat model geared up with the DJI O3 and GPS.

Observe: The SpeedyBee Mario 5 doesn’t include a receiver. You’ll want so as to add one, reminiscent of an ExpressLRS receiver: https://oscarliang.com/setup-expresslrs-2-4ghz/#Receivers

Unboxing

Speedybee Mario 5 Bnf Fpv Drone Unbox Accessories

Right here’s what comes within the field:

  • HQ J40 Props: A set of 4 5.1x4x3 propellers.
  • Battery Straps: Two SpeedyBee rubberized straps.
  • {Hardware}: Screws, prop mounts, spare aspect plates and a receiver cable.

Specs

  • Body: Mario 5
  • Motors: SpeedyBee Storm 2306.5 1880KV
  • Flight Controller: SpeedyBee F405 V4
  • ESC: SpeedyBee 55A 4-in-1 BLS ESC (flashed with Bluejay)
  • FPV System (Non-compulsory): DJI O3 Air Unit
  • Propellers: HQ J40 5.1x4x3
  • LEDs: Aspect panels with built-in LED Strip
  • Advisable Battery: 6S 1000–1800mAh
  • High Velocity: Marketed max velocity 190 km/h
  • Flight Time: 5 to 10 minutes, relying on flight fashion and battery measurement
  • Weight (with DJI O3):
    • With out battery: 497g
    • With 6S 1100mAh: 697g
    • With 6S 1100mAh and GoPro 11: 1051g

Design

Taking the Mario 5 out of the field, my first thought was, “This factor is constructed like a chunk of artwork!” It options clear aspect panels with built-in LED strip, including a flashy but useful aesthetic. For these seeking to optimize weight, these panels will be eliminated to barely improve flight efficiency, which I’ll do later on this assessment.

Speedybee Mario 5 Bnf Fpv Drone Side

The body is constructed with 6mm arms and a pair of.5mm carbon fiber high/backside plates, bolstered with a CNC aluminum digicam cage within the entrance for added sturdiness. The construct high quality is spectacular, with SpeedyBee’s consideration to element evident in neatly routed wiring, sturdy motor mounts, and safe fastening.

Speedybee Mario 5 Bnf Fpv Drone Camera Dji O3

The body is appropriate with analog, Walksnail, and DJI O3 air models, giving pilots flexibility in FPV setup choices.

Speedybee Mario 5 Bnf Fpv Drone Bottom

Having reviewed the Mario 5 body earlier than, I can say it’s well-engineered however advanced, with some heavy ornamental parts that is probably not important for each pilot. It’s a strong 5-inch drone weighing 497g with out the battery—undoubtedly crash-resilient, although a bit on the heavy aspect for a 5-inch FPV drone. For comparability, the Orqa DreamX, which I reviewed not too long ago, weighs simply 340 grams. However that’s an analog quad, with the O3 Air Unit factored in, the Mario 5 is roughly 130g heavier. It’s A LOT.

One pleasant characteristic is the Mario startup sound. Upon plugging within the battery, the Mario 5 performs the enduring Mario theme music, including persona to every flight. It’s a small contact, but it surely provides to the enjoyable issue.

Speedybee Mario 5 Bnf Fpv Drone Motor Propeller

The drone’s design contains mounting house for a GPS module, which I might undoubtedly suggest for enabling GPS Rescue mode. It is a helpful characteristic when you plan to fly long-range or in unfamiliar areas, as it can permit the drone to return dwelling if it loses sign.

Speedybee Mario 5 Bnf Fpv Drone Rear Gps Dji O3 Antenna Mount

The XT60 pigtail comes out in the midst of the highest plate, the placement is useful and handy, although it could possibly get in the way in which and restrict digicam tilt when you’re utilizing a GoPro. For extra flexibility in digicam angles, relocating the XT60 to the again may be preferable.

Speedybee Mario 5 Bnf Fpv Drone Lipo Battery Strap Top Plate Pad

Speedybee Mario 5 Bnf Fpv Drone Lipo Battery Plugged In

Lastly, the O3 Air Unit is surrounded by aluminium aspect panels that act as heatsink. Fortunately, you continue to have easy accessibility to the USB-C port and SD card slot, downloading O3 footage is handy. However the place I reside, it’s chilly sufficient that overheating hasn’t been a problem, so I plan to take away the heatsink to save lots of weight.

Speedybee Mario 5 Bnf Fpv Drone Dji O3 Sd Card Usb Port

Construct High quality

Taking the Mario 5 aside, I used to be instantly impressed by SpeedyBee’s consideration to element. The cables are trimmed to the proper size, and the soldering is clear {and professional}. This meticulous meeting not solely enhances sturdiness but in addition minimizes potential points over time—one thing SpeedyBee has clearly prioritized on this design.

Speedybee Mario 5 Bnf Fpv Drone Esc Motor Soldering

I additionally recognize that all {hardware} is SpeedyBee-branded—the body, flight controller, ESC, and motors are all from the identical model, making a cohesive construct the place every part is absolutely appropriate with the others.

Speedybee Mario 5 Bnf Fpv Drone Flight Controller

Lastly, one main inconvenience, is that the aspect panel blocks the USB port on the flight controller. You need to unscrew one screw first to open the aspect panel.

Speedybee Mario 5 Bnf Fpv Drone Side Plate Usb C Port

Speedybee Mario 5 Bnf Fpv Drone Led Strip Side Plate Wire

Then you’ll notice it doesn’t open fairly vast sufficient to insert the USB cable, which is embarrassing.

Speedybee Mario 5 Bnf Fpv Drone Usb C Port Fc Connect

I needed to take away the aluminium “fin” subsequent to the digicam to be able to open the aspect panel extra. Alternatively, you may additionally use the SpeedyBee app in your telephone, and configure the drone wirelessly by means of Bluetooth.

Speedybee Mario 5 Bnf Fpv Drone Connect Fc Usb Cable

The aspect plate additionally covers the SD card slot on the flight controller, which might be inconvenient when you plan to make use of Blackbox. You’ll have to take away the aspect plate to entry it, and I’ll stroll you thru this course of later within the assessment.

Including Your Personal Receiver

Apparently, the Mario 5 doesn’t include a receiver, so technically it’s not a real BNF (bind and fly) drone; as a substitute, it’s a PNP (plug and play) mannequin. Whereas this may appear uncommon and inconvenient, it does provide flexibility in choosing your most popular receiver kind.

Fortunately, putting in the receiver is fairly simple in case you are utilizing an ELRS receiver. The drone features a receiver cable which you could solder to your receiver after which plug straight into the drone. It’s a simple course of, and also you received’t have to fully disassemble the drone to put in it, which is a pleasant contact for anybody seeking to get airborne rapidly.

Speedybee Mario 5 Bnf Fpv Drone Install Receiver Solder Connector

Speedybee Mario 5 Bnf Fpv Drone Install Elrs Receiver

Speedybee Mario 5 Bnf Fpv Drone Bottom Elrs Receiver Light Led

Flight efficiency

Proper from takeoff, it was clear this drone packs severe energy. Though the Mario 5 is on the heavy aspect, and the motors are the comparatively smaller 2306.5 (most 5″ drones as of late use 2207 motors), it nonetheless delivers an exhilarating quantity of thrust. It’s quick, highly effective, and responsive—all the things you need in an FPV drone.

The Mario 5 simply hits speeds of as much as 150 km/h and cruises comfortably round 100 km/h. This makes it greater than succesful for high-speed chases.

Whereas the inventory tune has room for enchancment, it supplies a clean flight expertise. The controls really feel barely “mushy” as a result of conservative tune, however I believe it fits nicely to newcomers and pilots targeted on relaxed, cinematic footage. For extra aggressive flyers, some tuning could make the Mario 5 much more responsive.

Right here’s the gyro noise graph of the inventory tune.

Speedybee Mario 5 Bnf Fpv Drone Spectral Analyzer Gyro Noise

By way of flight time, I bought round 5:30 to six:30 utilizing a 6S 1100mAh LiPo battery, relying on flying fashion. It hovers at round 21% throttle with a totally charged battery—not as quick as another BNF quads with lighter construct and bigger motors, but it surely nonetheless affords loads of energy and feels extra manageable when navigating by means of tight areas.

The GPS performs nicely, getting 17 satellites after a few minutes. Nevertheless, rescue mode isn’t configured, so that you’ll have to set it up your self. I’ve a information right here for anybody who wants assist with that: https://oscarliang.com/setup-gps-rescue-mode-betaflight/

The present sensor is fairly correct out of the field, though I wanted to barely enhance the size by 3 factors for optimum readings.

With additional PID and filter tuning, this drone’s efficiency will be elevated considerably. I spent 2 hours on a customized tune for this quad, which I’ve shared on my Patreon. By optimizing the filters and PID settings, I managed to make the Mario 5 way more exact and responsive, giving it a extra related, snappy really feel that’s good for freestyle flying.

Take a look at a few of my flight footage to see the distinction:

Inventory Tune:

Customized PID/Filter Tune:

Tips on how to Setup

Default CLI dump (CLI diff) will be discovered right here.

Establishing the SpeedyBee Mario 5 FPV Drone for its first flight is simple:

  1. Set up and Bind Receiver: Solder your ELRS receiver (I’m utilizing the BetaFPV Nano 2400 RX) and full the binding course of.
  2. Bind DJI O3: The DJI O3 unit comes pre-activated, so it’s ready to bind out of the field.
  3. Modes: Configure switches for arming and mode adjustments, reminiscent of angle mode.
  4. OSD: Apply my OSD template: https://oscarliang.com/betaflight-osd/#HD-with-GPS
  5. That’s it!

The ESCs come pre-flashed with Bluejay firmware (J-H-40 Bluejay 0.19 48kHz), so no extra configuration is required.

To alter settings in Betaflight, you may wish to take away the aspect plates first. Alternatively, the SpeedyBee app in your telephone permits you to configure settings remotely by way of Bluetooth or WiFi—preferrred for fast subject changes.

Screenshot 20241107 230531

For weight discount, I eliminated non-essential elements just like the aspect panels and O3 heatsink. These are principally for aesthetics and don’t contribute to flight efficiency, in actual fact they make it worse as they’re simply useless weight. 45g of weight saving is huge on a 5″ quad!

When changing the O3 heatsink with standoffs, I observed the body peak is definitely 23mm which requires 23mm standoffs, an unusual size. I’ve each 22 and 24mm standoffs, simply no 23mm. Ultimately I simply used 22mm standoffs with a 1mm spacer as a substitute.

Speedybee Mario 5 Bnf Fpv Drone Remove Dji O3 Heatsink

Speedybee Mario 5 Bnf Fpv Drone Remove Side Plates

Speedybee Mario 5 Bnf Fpv Drone Remove Side Plates Dead Weight

A Few Drawbacks

Whereas the Mario 5 has rather a lot going for it, there are a couple of areas it could possibly enhance on:

  • Restricted USB Entry: Accessing the USB port on the flight controller requires partial disassembly. Though the SpeedyBee app covers most configuration wants, simpler USB entry could be useful.
  • No Pre-installed Receiver: An included ExpressLRS receiver would make it a real BNF, sparing pilots from further soldering and meeting.
  • Weight: At 497g, it’s on the heavier aspect for a 5-inch quad. Eradicating the aspect plates and metallic elements can cut back weight by as much as 45g, making it extra agile and environment friendly.
  • PID and Filter Tuning: The inventory tune leaves room for optimization. SpeedyBee has taken a conservative strategy right here, which supplies a secure margin for error and minimizes potential points like motor overheating, however superior pilots could favor a extra aggressive setup.
  • No Buzzer: It has flashy LEDs, however no buzzer?! Please can we get our precedence straight? 🙂

Speedybee Mario 5 Bnf Fpv Drone

Remaining Verdict: Is the SpeedyBee Mario 5 for You?

The SpeedyBee Mario 5 is a wonderful selection for anybody seeking to dive into FPV or improve to a strong 5inch 6S platform with out the effort of constructing from scratch. The Mario 5 combines high-quality elements, considerate design, and clean flight efficiency in a single package deal, making it a incredible choice for pilots who need a nearly ready-to-fly expertise.

You should buy the Mario 5 FPV Drone from:

Whereas the setup course of requires including a receiver, and the body design has some inconveniences, these aren’t deal breakers. With a little bit of modifications, tuning and persistence, these limitations will be overcome.

Total, SpeedyBee has delivered a strong, well-built quad within the Mario 5 FPV drone, providing the efficiency FPV pilots want. If you happen to’re after a strong, dependable quad that saves you from constructing it your self, the Mario 5 is a good decide.

For many who wish to optimize freestyle efficiency, try my customized tune accessible on my Patreon. Benefit from the flight!

Leave a Reply

Your email address will not be published. Required fields are marked *