3D Printing Webinar and Occasion Roundup: November 10, 2024 – 3DPrint.com

3D Printing Webinar and Occasion Roundup: November 10, 2024 – 3DPrint.com


We’ve acquired one other busy week forward of webinars and occasions world wide! There are a number of open homes and conferences, superior AM coaching, a 3D printer launch occasion, our personal AM Funding Methods, and way more. Learn on for all the main points!

November 10 – 13: Worldwide Convention on Biofabrication 

From November 10-13 in Fukuoka, Japan, the Worldwide Convention on Biofabrication can be held. The objective is to offer a platform on this thrilling discipline to share management, trade concepts and achievements, and foster collaboration. A variety of subjects can be lined in the course of the plenary periods, displays, and fast hearth talks, together with bioprinting, drug supply, biohybrid robots, tissue regeneration, and extra.

“Along with our convention, I’m happy to announce that the Kyushu Grand Sumo Event, a distinguished occasion on this planet of sumo wrestling, can be held throughout our assembly. It will add an thrilling dimension to our go to and permit contributors to satisfy firsthand the standard and distinctive sport of sumo.”

You’ll be able to register for the convention right here.

November 11 – 14: Stratasys Continues Superior Coaching

Stratasys continues its superior coaching programs this week, first at its North American subsidiary headquarters in Minnesota. From November 11-13, “PolyJet Superior Operations” can be supplied to PolyJet machine clients, after which “P3 Superior Operations” can be held for Origin One clients from November 12-14. Then, November 12-13, “FDM Superior Operations” coaching can be supplied on the firm’s German headquarters in Baden-Baden.

“You might be in the suitable place if you wish to begin or deepen your studying about additive applied sciences and your Stratasys printer.”

Keep watch over the Stratasys Academy On-line Studying web page for additional coaching occasions.

November 12 – 15: electronica 2024

The world’s main commerce honest and convention for electronics, electronica 2024, can be held in Munich, Germany from November 12-15. The honest, held each two years, represents the total spectrum of applied sciences, merchandise, and options from the electronics {industry}. About 70,000 guests are anticipated, and over 2,800 exhibitors can be unfold throughout 16 exhibition areas masking all sectors, similar to semiconductors, assemblies, printed electronics, and extra.

“Follow-oriented boards and world-class conferences present in-depth insights into the newest analysis and utility tendencies – from automation with AI to electromobility and sensible power.”

You should purchase your ticket for the commerce honest right here.

November 12: Industrial Scale Mass Manufacturing with SLA 3D Printing

3D Printing Business is internet hosting a dwell webinar with UnionTech at 8 am EST on Tuesday, November twelfth, all about “Industrial Scale Additive Manufacturing & Mass Manufacturing with SLA 3D Printing.” The corporate is dedicated to innovation in SLA 3D printing and delivering skilled SLA options throughout a wide range of industries. Throughout the webinar, Stanley Leung, Sr. Director of Gross sales, APAC, UnionTech, will focus on some great benefits of the corporate’s know-how, emphasizing product traces, materials choices, functions, and notable buyer use circumstances. There will even be a dwell Q&A session, and 100 free expo passes to Formnext 2024 can be obtainable.

As a vital part of additive manufacturing, Giant-Scale Excessive-Pace SLA Know-how maintains a distinguished place within the discipline of vat photopolymerization 3D printing for productive and precision manufacturing functions.”

You’ll be able to register for the webinar right here.

November 12: Launch Occasion for Supernova’s Pulse VLM Platform

Supernova will introduce its new VLM manufacturing platform, Pulse, throughout an on-line launch occasion at 10 am EST on the twelfth. VLM, or Viscous Lithography Manufacturing, can deal with resins with as much as 100 instances greater viscosity than these used throughout standard DLP, SLA, or MSLA processes. The Pulse affords {industry} grade-materials, an automatic workflow, twin materials components, and extra, which can be defined in the course of the on-line occasion. Attendees will be taught why viscosity issues, hear about 12 new proprietary supplies, and be launched to the Pulse Platform, consisting of the VLM printer, a Publish Processing Cell, and software program.

“Be part of us for the unique unveiling of our new manufacturing platform that’s set to remodel brief and mid-scale manufacturing with industry-grade supplies.”

You’ll be able to register for the launch occasion right here.

November 12: Expertise Stratasys Tour Continues

This week, Stratasys wraps up its Expertise Stratasys tour, which has supplied customers a handy solution to see the corporate’s know-how in-person, as every cease is hosted by a neighborhood 3D printing group that may reply questions and stroll guests by means of the varied printers and functions. For its ultimate cease, the truck will go to enterprise incubator UF Innovate – The Hub in Gainesville, Florida on November twelfth from 10:30 a.m. to 2:30 p.m.

“Be part of us at one in every of our tour stops throughout america to see the newest in Stratasys 3D printers, supplies, software program and additive options, together with Stratasys printers – the H350™, F370CR, J55™, Origin® One, Neo®800 and the brand new F3300™.”

Keep watch over the Expertise Stratasys tour calendar right here to see if the truck will come to you subsequent 12 months!

November 12: Stratasys 3D Printing for Scholar Racing Groups

Additionally on the twelfth, however at 3 pm EST, Stratasys will maintain a webinar about “Breaking Conventional Limits: 3D Printing as a Sport-Changer for Scholar Racing Groups.” Confronted with design challenges and quick turnaround instances, the engineering college students in USC Racing used 3D printing to get a aggressive benefit within the System SAE competitors. They created customized high-performance components, like aerodynamic options and steering wheels, for each inner combustion and electrical race automobiles, utilizing Stratasys 3D printing, ULTEM 1010 resin, and FDM Nylon 12CF carbon fiber. The group scaled from simply 5 to over 40 3D printed components of their newest automotive, due to the design freedom supplied by 3D printing.

“Hear from Lucas Dudley, USC Racing’s chief engineer, as he shares his insights on the time-saving advantages of AM, the significance of prototyping for high-stakes efficiency, and the function of high-temperature, non-conductive supplies in designing secure and environment friendly battery programs. Whether or not you might be in engineering, schooling, or within the newest in 3D printing functions, this webinar will showcase real-world insights into AM’s influence on the way forward for motorsport innovation.”

You’ll be able to register for the webinar right here.

November 13: ADDMAN Open Home at HARBEC

From 10 am to 1 pm EST on Wednesday, November thirteenth, ADDMAN is holding an unique Open Home at its HARBEC facility in Ontario, New York. The occasion will deal with supporting your product’s full manufacturing lifecycle, and features a presentation all about HARBEC’s complete manufacturing options, from 3D printing to injection molding. Facility excursions can be supplied, together with of its licensed ISO Class 8 cleanroom, and the morning will wrap up with networking and a catered lunch.

“Be part of us for an unique Open Home at ADDMAN’s HARBEC facility, the place you’ll discover superior manufacturing—from prototype to manufacturing—tailor-made for industries that demand precision, reliability, and scalability. Expertise firsthand how ADDMAN’s cutting-edge applied sciences, backed by industry-leading certifications are reworking manufacturing in mission-critical sectors, from aerospace to healthcare.”

You’ll be able to register for the open home right here.

November 13: Biomedical Titanium Implants with Meltio

This summer season, Spanish analysis heart AIDIMME put in a Meltio 3D printer prototype as a part of the ATILA analysis mission, targeted on 3D printing biomedical implants out of Titanium 64 with Meltio’s distinctive wire laser metallic deposition (LMD) know-how. Now, Meltio is sharing in regards to the mission in a webinar at 11 am EST on the thirteenth about “Reworking Healthcare: First biomedical titanium implants 3D printed with Meltio.” AIDIMME’s ATILA mission marks a significant breakthrough in Spain with the profitable 3D printing of biomedical titanium implants with Meltio’s know-how, and the corporate’s Course of and Materials Supervisor, Alejandro Lázaro, will provide an introduction to wire-LMD, focus on the ATILA mission and Titanium 64, and reply attendees’ questions.

“This breakthrough mission is setting new requirements in velocity and biocompatibility for healthcare functions.”

You’ll be able to register for the webinar right here.

November 13: FX10 Launch Roadshow in Australia

The FX10 Launch Roadshow and 2025 Innovation Days by Invenio continues this week in Australia, heading to the Adelaide Conference Centre on Wednesday the thirteenth. Attendees will get to see new supplies, get pleasure from meals and drinks, community with their colleagues, be taught what’s new in SOLIDWORKS 2025, take a look at components 3D printed on the Markforged FX10, and extra.

“Uncover the world’s first hybrid 3D printer: FX10, combining metallic + composites, with double the velocity and print capability.”

You’ll be able to register for the occasion right here. Keep watch over this web page for additional tour dates!

November 14 – 15: third Worldwide Convention on 3D Printing & Additive Manufacturing

Scisynopsis is holding the third Worldwide Convention on 3D Printing & Additive Manufacturing in Rome, Italy from November 14-15. With a theme of “Print the Future: Unleashing Innovation Via 3D Printing Excellence,” the occasion is “a dynamic and progressive gathering of minds on the forefront of 3D printing and additive manufacturing.” There can be networking periods, workshops and symposiums, panel discussions, and keynote audio system, masking a variety of scientific periods together with nanoprinting, bioprinting, lasers in 3D printing, 3D picture processing and visualization, metallic and polymer 3D printing, 3D printing in orthopedics and traumatology, and extra.

“This convention serves as a melting pot for thought leaders, researchers, {industry} specialists, and fans, converging to discover the huge potential and transformative energy of additive applied sciences.”

You’ll be able to register for the occasion right here.

November 14: Manufacturable Designs for AM with Cognitive Design

French software program firm Cognitive Design Methods (CDS) is holding its first webinar, “Generate Manufacturable Designs for Additive Manufacturing with Cognitive Design,” at 7:30 am EST this Thursday, November 14th. Engineers have to make sure that their optimized designs are manufacturable, which is often accomplished by balancing the liberty of advanced designs with real-world manufacturing restraints. Cognitive Design can simplify this course of with its manufacturing-driven design (MDD) method, which attendees will find out about in the course of the webinar. They’ll additionally be taught skilled ideas for design success with CDS, tips on how to effectively detect potential 3D printing dangers, and extra.

“You’ll see how our software program ensures manufacturability with two real-world case research. First, we’ll study a posh, topology-optimized design for mass manufacturing, demonstrating how Cognitive Design ensures manufacturability from begin to end. We’ll then discover a less complicated industrial half presently produced through standard strategies, revealing how simple it’s to transition it to additive manufacturing for streamlined and environment friendly manufacturing.”

You’ll be able to register for the webinar right here.

November 14: HP & DyeMansion on 3D Printed Orthotics & Prosthetics

HP is teaming up with DyeMansion for a webinar about “Enabling 3D Printed O&P” at 8 am PST on the 14th, which is able to clarify how 3D printing and post-processing applied sciences are reworking the Orthotics & Prosthetics (O&P) discipline. Attendees will come away with a transparent understanding of automated 3D printing workflows for O&P, data of sturdy, biocompatible supplies for patient-specific wants, sensible insights into utilizing 3D printing to raise affected person care, and extra.

“This session highlights progressive options that automate manufacturing, improve materials high quality, and supply customizable, biocompatible components—delivering improved affected person outcomes and care.”

You’ll be able to register for the webinar right here.

November 14: AM Funding Methods 

On November 14th, simply earlier than Formnext—the world’s largest commerce present for the AM {industry}—Additive Manufacturing Analysis and Cantor Fitzgerald will as soon as once more host “AM Funding Methods.” This one-hour on-line roundtable is targeted on the enterprise setting and aggressive panorama of the 3D printing and additive manufacturing {industry}. A number of main {industry} specialists can be taking part, together with Materialise CEO Brigitte de Vet-Veithen; Government Vice President of Analysis for AM Analysis Scott Dunham; Sam O’Leary, CEO of Nikon SLM Options; 3D Methods President and CEO Jeff Graves, and others.

“Acquire perspective from specialists at AM Analysis, Cantor, and main 3DP/AM {industry} CEOs.”

Register right here for the free occasion. You can even meet most of those panelists in particular person at Additive Manufacturing Methods (AMS) 2024 in New York Metropolis, February 4-6, 2025!

November 14: Members-Solely Election Wrap-up with AM Coalition

Additionally on the 14th, the Additive Manufacturing Coalition is internet hosting a members-only session at 3 pm EST, “Election Wrap-up: What Does It Imply for the Additive Group?” The dwell Zoom roundtable will even take a look at 2025 and what we as an {industry} can anticipate from the newly elected federal authorities officers; audio system embrace Matt Herrmann, Principal, The Roosevelt Group, and Craig Piercy, Government Director and CEO, American Nuclear Society. In case your group is a member of the AM Coalition, you’re eligible to take part. If you happen to’re not a member, however want to be, contact addi@addmfgcoalition.org to debate the advantages of membership.

“Be part of us for an in-depth dialog about how the New Congress and New Administration is shaping up and what it may imply for the Additive Manufacturing neighborhood.”

To RSVP for this members-only roundtable, you’ll want a Members-Solely Account together with your organizational e mail tackle.

November 15: 3DOLOGiE’s Digital FX10 Metallic Tour

Lastly, at 11 am EST on Friday, November fifteenth, 3DOLOGiE will maintain an internet occasion, “Meet the FX10 Metallic: Machine Tour,” all in regards to the Markforged FX10. Attendees will first be taught the background of metallic FFF 3D printing, after which see a dwell demonstration of the FX10. They’ll additionally be taught who the 3D printer is for, and have an opportunity to ask questions on the finish.

“Be part of 3DOLOGiE for a digital dwell machine tour of the Markforged FX10, the world’s first metallic and composite 3D printer.”

You’ll be able to register for the net machine tour right here.

Leave a Reply

Your email address will not be published. Required fields are marked *